Goo file - "BottomWaitTimes" in Configuraiton.ini

[Darior78]

Got an Elegoo Mars 5 (non Ultra) for some tests. This machine can read only Goo files and so I'm trying to tailor my settings with UVTools.
Activting "Per layer settings", I've observed that all works but "Wait before Cure" for the bottom layers works as expected.

Extracting the Goo file I see that in Configuraiton.ini "BottomWaitTimes" are all set to 0 while normal layers "WaitTimes" are correctly set (see attached picture).
Altough in Layers.ini all the Waittimes are correctly set, the printer ignores the ones for Bottom Layers.

Not able to code, I spent a couple of hours with Chatgpt, with much struggle :), to create a program to repack an extracted Goo (function that should be integrated in UVTools IHMO) file so that I could try to manually edit Configuration.ini with the correct "BottomWaitTimes".
The test was succesfull, proving that, even if in Layers.ini the values are set, the printer ignores them if they are set to 0 in Configuration.ini.

EDIT: It happens only when exporting from Elegoo Satellite in CTB and after converted in Goo.

[sn4k3]

Its a bug, will be fixed on next release.

[Darior78]

Doing other tests I've seen also the following: after changing Waittimes in UVTools and saving the Goo file, in Configuration.ini the Waittimes are still the ones set by the Slicer and not udated to the new values

[sn4k3]

Yes, as told is bug in UVtools, bottoms are not being saved nor read.

[sn4k3]

Should be fixed now