We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
fix: restore watchdog 0; in ymodem sections
fix: use ${loadaddr} instead of ${baseaddr} in ymodem/loady sections loady uses ${loadaddr} (default 0x80600000 on Ingenic), not ${baseaddr}. Using a mismatched ${baseaddr} of 0x82000000 caused sf write to flash 0xff-filled memory instead of the uploaded image, bricking the device.
Updated U‐Boot Cheatsheet (markdown)
Add command suggestions for panning and tilting the camera
Update link to Telegram-Bot-Integration
Add Telegram Bot Integration to Wiki
Add Telegram Bot Integration to Sidebar
Updated _Sidebar (markdown)
Image Builder: point most users to weekly release images first
Add Image Builder page and sidebar entry
Add USB Boot Mode to sidebar
Add USB Boot Mode page
Fix: SD card flashing works for switching between branches
Update Wyze v3 boot loop resolution steps
Update Updating-Firmware: remove partial upgrades (disabled), remove WebUI Flash Operations (gated behind dev build flag), simplify to full-only
Update Updating-Firmware: fix sysupgrade options, add -b flag, correct -d usage, fix self-update URL, document SD card fallback, clean up recommendations
Remove Configuring Wi-Fi Access tombstone, repoint stale links The page was renamed to Configuration: Wi-Fi Access in a64da7a (pure rename, no content lost; the new page has since been expanded). Links in four articles updated to the new name, anchors verified.
Merge Aosu/Dekco CL5 (DCL5) page into Camera: Aosu C5L Same hardware, two pages. Ported the disassembly detail, UART pin location note, and alternate CL5/DCL5 naming. The PCB photo on the duplicate page was a dead link (404, no archive copy).
Sidebar: add missing pages, fix links to renamed pages
Updated Home (markdown)
Updated Camera: LSC 3215672 (markdown)
Update Night-Mode: replace irled with light command
Updated Camera: AliExpress LTIA‐37FJZ (Vanhua Z55 module) (markdown)
Updated Development (markdown)
Fix diagnostics docs, NFS persistent mount, and add enable_updates prerequisite - Troubleshooting.md: Expand thingino-diag docs with -u, -j, -f flags and correct upload URL (tb.thingino.com) - Network-Storage.md: Replace rc.local instructions with jct set nfs_share (S43mounts auto-mounts) - Updating-Firmware.md: Add enable_updates prerequisite for sysupgrade
Updated Camera: Jooan A6M (markdown)
Updated Updating Firmware (markdown)