modbussy

modbussy

modbussy is a command line to work with modbus networks. You can define datapoints which are then read from modbus servers. It's a little utility for modbus.

See it in action when connecting to the Pichler LG350 ventilation unit.

Installing

You can install modbussy with Homebrew, Go or from Github

Homebrew

brew tap brutella/modbussy
brew install modbussy

Install with Go

See latest release

go install github.com/brutella/modbussy@latest

Download from Github

1. Determine os uname (e.g. Linux, Darwin) and architecture uname -m (e.g. arm64, i386, x86_64).
2. Construct download url https://github.com/brutella/modbussy/releases/latest/download/modbussy_{os}_{architecture}.tar.gz

Example URL

curl -L https://github.com/brutella/modbussy/releases/latest/download/modbussy_Linux_arm64.tar.gz | tar xz

One Liner to download and extract

curl -L https://github.com/brutella/modbussy/releases/latest/download/modbussy_$(uname)_$(uname -m).tar.gz | tar xz

Usage

Run modbussy by executing the command modbussy. Easy!

Configuration

The first screen lets you configure the connection to modbus. You can connect via

• RTU
• TCP
• RTU via TCP
• or RTU via UDP.

Then specify the address and optionally the data rate, parity, the number of start and stop bits.

Main UI

The main UI shows a list of datapoints.

• Press + to add a new datapoint where you specify the server id, address, name, datatype and flag (readonly, or read-writable).
• You can reload tha list of datapoints by pressing r.
• Once you have a list of datapoints, you can monitor with the auto-reload feature by pressing l.

Writing values

• You can write to a datapoints by selecting it in the table and then pressing w.
• Enter a new value and choose Write.

Storage

By default, modbussy stores data at ~/.modbussy. You can specify a different file with --db.

modbussy --db=~/modbus/pichler