ColorMatch

Another nice minigame!
You get a colored wool in your Inventory and you have to jump onto the corresponding color! Multiple arenas can be set up that are joinable via signs/commands. As of now the last man standing wins, which can't be changed. See further information and configuration options down below.

Setup

Pex doesn't care about OP, you need to give yourself the permissions!

Set the main lobby where all join signs will be: /cm setmainlobby

For each new arena:

/cm createarena [name]
Set the waiting lobby (different than the main lobby!): /cm setlobby [name]
Setup the minigame (will create a 64x64 area full with wool, be aware of that!): /cm setup [name]

To create a join sign:
1st line: colormatch; 3rd line: arenaname

Creating a join sign requires the permission cm.sign or colormatch.sign.

Join Sign

Smaller Arenas

As of v1.5 you can also create smaller arenas. The setup is the same except for one command, /cm setup is now /cm setupsmall. It will create an 32x32 arena and not the default 64x64 arena, which is good for small servers with less ram.

Glass/Clay mode

As of v1.5.3 you can also create glass arenas. The setup is the same except for one command, /cm setup is now /cm setupglass. This will generate a normal arena but with stained glass in different colors. As of v1.5.5 clay arenas are possible, too.

Commands/Permissions

Command	Description	Permission
/cm createarena [name]	creates a new arena	colormatch.setup
/cm setlobby [name]	sets the waiting lobby for a new arena	colormatch.setup
/cm setup [name]	sets the new arena up	colormatch.setup
/cm setupsmall [name]	sets the new arena up (32x32 mode)	colormatch.setup
/cm setupsmallclay [name]	sets the new arena up (32x32 clay mode)	colormatch.setup
/cm setupglass [name]	sets the new arena up (glass mode)	colormatch.setup
/cm setupsmallglass [name]	sets the new arena up (32x32 glass mode)	colormatch.setup
/cm setupclay [name]	sets the new arena up (clay mode)	colormatch.setup
/cm setmainlobby	sets the main lobby	colormatch.setup
/cm removearena [name]	removes a arena	colormatch.setup
/cm join [name]	joins a game per command
/cm leave	leaves the game
/cm kitgui	shows all kits in a gui
/cm changekit [kit]	changes the kit and lists all, if unknown kit provided
/cm start [name]	forces an arena to start	colormatch.start
/cm reload	reloads the config	colormatch.reload
/cm list	lists all arenas	colormatch.list
/cm endall	ends all running colormatch tasks, if something bad happens	colormatch.end
/cm setdifficulty [arena] [difficulty]	sets the difficulty of an arena	colormatch.setup
/cm setmaxplayers [arena] [count]	sets max players of an arena	colormatch.setup
/cm setminplayers [arena] [count]	sets min players of an arena	colormatch.setup

Creating a join sign requires the permission cm.sign or colormatch.sign.

Config

config:
  auto_updating: true # I recommend you to set that to true for bugfix releases etc.
  rounds_per_game: 10 # how many times the color will change per game
  start_countdown: 5 # seconds to wait before starting a game
  default_max_players: 4 # max amount of players that can join and will be used as a default
  default_min_players: 3 # amount of players required to start a game and min amount of players that will be used as a default
  use_economy_reward: true # if set to true, the winner get the money reward, if false, the item reward
  money_reward_per_game: 30
  itemid: 264
  itemamount: 1
  use_command_reward: false # will execute the following command as a reward, if set to true
  command_reward: pex user [user] group set ColorPro
  start_anouncement: true # enables server broadcasts
  game_on_join: false # autostart (for bungee servers)
  bling_sounds: false # turn this on if you want to get 3 blings played before the wool disappears
  kits:
    default:
      name: default
      potioneffect: SPEED
      amplifier: 1
      lore: The default class.
strings:
  saved:
    arena: '&aSuccessfully saved arena.'
    lobby: '&aSuccessfully saved lobby.'
    setup: '&6Successfully saved spawn. Now setting up, might &2lag&6 a little bit.'
  not_in_arena: '&cYou don''t seem to be in an arena right now.'
  config_reloaded: '&6Successfully reloaded config.'
  arena_is_ingame: '&cThe arena appears to be ingame.'
  arena_invalid: '&cThe arena appears to be invalid.'
  arena_invalid_sign: '&cThe arena appears to be invalid, because a join sign is missing.'
  arena_invalid_component: '&2The arena appears to be invalid (missing components
    or misstyped arena)!'
  you_fell: '&3You fell! Type &6/cm leave &3to leave.'
  you_won: '&aYou won this round, awesome man! Here, enjoy your reward.'
  starting_in: '&aStarting in &6'
  starting_in2: '&a seconds.'
  arena_full: '&cThis arena is full!'
  starting_anouncement: '&aStarting a new ColorMatch Game in &6'
  started_anouncement: '&aA new ColorMatch Round has started!'

Kits

Every kit besides the default one requires a permission, colormatch.kit.[kitname]. You can select a kit ingame by typing /cm changekit [name].

You can also add unlimited kits, but be aware that errors might appear, if the potioneffect is not valid. You can find a list of Potioneffects here.

    default:
      name: default
      potioneffect: SPEED
      amplifier: 1
      lore: The default class.

Arena Difficulty

You can set the difficulty for each arena as of v1.4. Simply do /cm setdifficulty [arenaname] [difficulty] to change it.

Possible difficulties are:

Difficulty	Description
0	Easy
1	Default
2	Hard

The Logarithm:

On each round, the following time is calculated for the next round. d is the difficulty, which can be 0, 1 or 2. 80L can be seen as 4 seconds (20L = 1 second). You can use the following function to determine the seconds in ticks for a round, if you're a big mathematician:

f(x) = 80 - (d * 20) - (4 * x)

Preview

Youtube

Thanks to Wukkit for creating this video like 3 hours after the first release! (a bit outdated as of now)

German tutorial video:

Other reviews:

[GERMAN] My german plugin tutorial: link.

[GERMAN] Another nice german review: link.

[SPANISH] Here's a spanish review for the plugin: link.

[ENGLISH] Another english quick tutorial: link.

[ENGLISH] Plugin review: link.

[POLISH] Plugin review: link.

[GAMEPLAY] Here's a quick gameplay video on Kamoworld by Cam: link.

[PORTUEGESE] Here's a nice portuguese tutorial + gameplay video: link

[ITAILIAN] link

Todo

add auto-rejoin
add leaderboards
add bungee signs support

Additional Information

You can find the source code here.

You can try this plugin out at server.kamoworld.com. ColorMatch is also included in MinigamesParty.

This plugin uses hidendra's Metrics system to send server related information like player count, java/bukkit/plugin version etc. to the official MCStats servers. You can disable this in the config.yml in plugins/PluginMetrics/.
The plugin also uses an autoupdater which can be turned off in the config (see above in the config section).

Have fun :)

Metrics